Technical Specifications - LOTRONIC BST P12DSP Manuel D'utilisation

P12DSP / P15DSP
Thank you for having chosen our active speaker. For your own safety, please read this user manual carefully before installing the device.
SAFETY INTRODUCTION
• If the device has been exposed to temperature changes due to environmental changes, do not switch it on immediately. The arising
condensation could damage the device. Leave the device switched off until it has reached room temperature.
• It is essential that the device is earthed. A qualified person must carry out the electric connection.
• Make sure that the available voltage is not higher than stated at the end of this manual.
• Make sure the power cord is never crimped or damaged. If it is damaged, ask your dealer or authorized agent to replace the power cord.
• Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the power cord by plug. Never pull out the
plug by tugging the power cord.
• DISCONNECT DEVICE: Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall
remain readily operable.
CAUTION :
1. Please be aware that damages caused by manual modifications to the device are not subject to warranty. Keep away from children and
nonprofessionals.
2. The light doesn't include any spare parts for repair, please check if all the parts are well installed and screws are fitted tightly before
operating. Do not use the light when the cover is open.
GENERAL GUIDELINES
• This device is only allowed to be operated with an alternating current of max. 230VAC/50Hz and was designed for indoor use only.
• Operate the device only after having familiarized yourself with its functions. Do not permit operation by person not qualified for operating the
device. Most damages are the result of unprofessional operation.
• Please use the original packaging if the device is to be transported.
• For safety reasons, please be aware that all modifications on the device are forbidden. Furthermore, any other operation may lead to
shortcircuit, burns, electric shock, crash, etc. If this device will be operated in any way different to the one described in this manual, the product
may suffer damages and the guarantee becomes void.

TECHNICAL SPECIFICATIONS

P12DSP
Boomer :
Driver :
Response of frequence :
SPL :
Sensibility :
Power RMS :
Power MAX :
Dimensions :
Gross Weight :
WARRANTY CONDITIONS
BST equipment is covered by a 2-year warranty on parts and labour except for battery.
The following rules apply from the day the equipment leaves the factory:
The date on the invoice is considered to be the date the warranty begins.
Only companies approved by BST are allowed to work on the equipment. Warranty becomes void when other service technicians open the
equipment.
During warranty period, defective equipment must be sent by pre-paid mail in the original box.
BST will return the goods by pre-paid mail during the first year of warranty; thereafter the mailing cost is to be paid by the recipient
Potentiometers have a limited lifetime and are not covered by the manufacturer for more than normal use.
For all service enquiries, refer to your local distributor, as he is best able to help you.
© Copyright LOTRONIC 2016
12''
1.35''
65Hz–20KHz (-10dB)
116dB
95dB
400W
800W
420x370x630mm
15Kg
ENGLISH
P15DSP
Boomer :
Driver :
Response of frequence :
SPL :
Sensibility :
Power RMS :
Power MAX :
Dimensions :
Gross Weight :
WWW.LOTRONIC.COM
15''
1.75''
55Hz–20KHz (-10dB)
118dB
96dB
450W
900W
450x400x685mm
18Kg
4