LaserPecker PowerPack 50000 Guide De L'utilisateur page 9

Method of Application
Power Bank Charging
·When charging this product, the mobile power supply has two charging ports, namely DC
input and TYPE-C input. Please select the corresponding device cable to charge this product;
·Flashing green of the indicator shows the power bank is being charged. When charging is
complete, the indicator lights up constantly.Please disconnect the charger in time when
charging is finished.
Power Bank Discharge
·Use the original charging cable or adapter to connect the power bank and mobile device.
·The process of using this product. Do not over-discharge the battery. Over-discharge
will cause great harm to life of the battery and the discharge voltage should not be
lower than the protection voltage of 19.2V.
Precautions
1. It is strictly forbidden to use informal chargers to charge this product, otherwise, product
accidents and failures will not be held responsible.
2. When charging, please place this product on a non- flammable and combustible surface.
Please power off the product when it is fully charged to prevent accidents.
3. After a continuous full load discharge, if the product is in a high temperature state, please
wait for it to cool to room temperature before charging.
4. It is forbidden to use this product in the environment of strong static electricity or strong
magnetic field, otherwise it may not work normally. Otherwise, part of the protection
function of this product.
��