Costway JS10028 Mode D'emploi page 4

2. In the following cases, please immediately stop using and
unplug the power cord plug from the socket:
(1) The power cord is broken or damaged;
(2) Accidentally splashing water on products and manual controllers;
(3) Relevant accessories are damaged or internal parts are exposed;
(4) Feel abnormal during massage (such as severe pain, smoking,
odor, etc.);
(5) Sudden power failure, lightning and high-speed driving.
3. Note:
(1) During massage, knead the head close to both sides of the neck,
otherwise it may cause pain;
(2) Do not use it during sleep or within 30 minutes after meals;
(3) Do not use this product when intoxicated or unwell;
(4) Do not directly press the roller of the massage head close to the
elbow joint, knee, chest or abdomen;
(5) This product has the function of temperature overheating
protection. The continuous use time should not exceed about 30
minutes. After using, unplug the power plug and let the machine rest
for 10 to 20 minutes to extend the life.
People who is not suitable for using this product
(1) People who are receiving treatment for diseases or have
abnormal physical conditions or the following conditions must consult
a doctor before use;
(2) People with back deformity or abnormality, people with treatment
history who will use it in the affected area, people with osteoporosis,
people who need to rest, and people who have a fever(above 38℃);
(3) Patients with electronic devices in their bodies, patients with
bleeding diseases, allergic constitution, hypertension and other
people should use with caution;
06
(4) Patients with malignant tumors;
(5) Patients with acute diseases such as heart disease;
(6) Pregnant women or those in menstruation;
(7) Children or those who have undergone surgical operations and
are physically unfit;
(8) Weak and sickly.
Repair and Maintenance
● For daily cleaning, please use neutral detergent and soft cloth to
wipe, and do not use corrosive detergent.
● If the power cord is damaged, it must be replaced or repaired by a
qualified person to avoid danger.
● Please unplug the power supply when not using this product or
when cleaning to avoid danger.
● Do not use any sharp objects to cut the product surface.
● Do not place the product in a damp environment, but in a dry and
ventilated place.
● Do not apply strong pressure or force on the product.
Trouble Shooting
Common Fault Phenomena Possible Causes
Power failure or not;
Whether the power plug
is correctly inserted into
The whole machine does
the power socket;
not work at all
Check whether the
power switch is turned
on.
Massage is slow and in Overweight pressing
low strength to the machine
Running in period of
With noise
new machine
*If the above solutions cannot be solved, please contact the
after-sales service.
Solution
Power failure or not;
Correctly and firmly
insert the plug into the
socket;
Open the switch key.
Adjust pressure
After 20 hours of use,
the noise will reduce
07