KSIX SPARK BXTW04VM Mode D'emploi page 8

Reset
1. Delete the connection between the earphones and the phone.
2. Tap the left or right earbud 5 times and then alternating red and blue lights will flash.
Once they turn o , the reset will be properly completed.
3. It can be used after reconnecting with the mobile phone.
Charge
• Earphones: Put the earphones into the charging box, this will automatically charge the
earphone, and the earphone will display a red light when charging.
• Charging case: Use the type-c charging cable included in the package to charge the
charging case.
Earphones indicator
• No pairing: Red and blue lights flash quickly.
• Waiting to be paired: One blue light flash quickly.
• Paired successfully: The indicator light is o .
• Power on: Red and blue light up flash quickly for 1 second.
• Power o / Play / Pause / Standby: The indicator light is o .
• Incoming call: Blue light flashes twice every 3 seconds.
• Calling: The indicator light is o .
• Charging: Red light is always on.
• End of charging: The indicator light is o .
Notes:
1. iPhones and some Android phones can support the adjustment of phone volume if you
need to use the headphones to adjust the volume, but for some Android phones, you can
only adjust the volume of the earphone itself. If you need to restore the default volume,
put the earphones in the charging case and take them out after the red light turns on.
2. When holding the earphone, do not touch the touch panel area of the earphone to avoid
misoperation.
Maintenance recommendations
• Regularly clean the product with a dry cloth. The product must be disconnected or
switched o when you clean it.
• Keep the connectors and/ or ports free from dust, lint, etc. to prevent improper
connections.
• Avoid breaking the device. Do not put objects over it or bend it too strong.
• If the product includes a cable do not bend it too strong and do not pull from it to
unplug the product.
• Do not wet the product. Keep it always in a dry place, away from humidity.
• When not using the product, store it in a place free from dust, dirt, lint, liquids, etc.
• If water or other liquids enter the product interior, unplug it immediately from any
attached power source or device it is connected to.
• Avoid dropping or hitting the product. It might be damaged.
• Do not use the product for anything other than its intended use.
• Please recycle the product in accordance with local environmental laws and regulations.