Publicité
Les langues disponibles
Les langues disponibles
Dear Customer
Thank you for purchasing the Safety Ladder.
The Safety Ladder has front and side safety rails for reassuring extra support, stability, safety and
confidence. With so many practical uses around the home, from decorating inside, to cleaning windows
outside, even pruning in the garden, it's so helpful. The two side rails are complimented by oversized
W38xD26 cm non-slip rubber trim steps and an extra-high front safety rail which reaches 61 cm above the
top step for holding or leaning against. The 4 step ladder has a maximum standing height of 95 cm from
the floor.
Maximum user weight 150 kg ( 330 pounds ).
Please check all the items listed below are inside the box
( appearance may vary ) :
1× Ladder main frame
1× Top hand rail
2× Side hand rail
4× Bolts
4× Lock nuts
4× Washers
Note : Protective Rubber Caps are attached to
protect product during transit.
Please remove these before assembly.
EN
4-Step
EN
ASSEMBLING THE PRODUCT
• Remove protective rubber caps.
• Slide on top hand rail until it clips into
place. ( Fig. 1 )
• There are 2 holes at the top and bottom of the
side hand rails.
• Place the hand rail over the outside of the ladder
main frame and top hand rail, ensuring all the
holes are aligned. ( Fig. 2 )
• Insert the bolt through the hole in the hand rail
and tighten with a screw driver through the
ladder main frame.
• Then add washer and then the lock nut, then
tighten ( see diagram below ).
• To secure both hand rails, repeat the same action
for all 4 holes.
• Now the ladder is assembled.
Ensure the hand rail is secured well by
using a screwdriver and 1 cm spanner to
tighten the bolt and nut.
6
Publicité
