Publicité
Les langues disponibles
Les langues disponibles
6.0 Operation
Read operating instructions before putting shredder into operation
Connect power cord to the power socket at the backside of the machine.
Connect the power cord to any standard 120V AC, 60Hz outlet.
6.1 Install wastebasket for shredded material
• Open cabinet door and pull the wastebasket completely out of the cabinet.
• Put plastic waste bag in basket (3 sample bags provided). Allow bag edges to overhang.
• Slide the wastebasket into the cabinet and shut the cabinet door
• Store this operation manual in slot inside cabinet door
6.2 Switching equipment "ON"
• Turn on the power switch at right side of the machine. The unit is powered.
• The LCD panel indicates machine is ready for shredding operation. (Figure 3)
Figure 3
Depending on the quantity of paper the shredding operation can be performed
either by auto or manual feeding:
1. Auto feed at high quantity of paper (max 500 sheets)
Open doors
Place maximum of 500 sheets of
paper into the paper tray.
When the shredding of all paper sheets inside the tray has been completed,
the machine automatically stops.
All manuals and user guides at all-guides.com
Note: The display indication is always
shown for unlocked paper tray doors.
6
Close doors
Press "START" button. The machine
starts shredding sheet by sheet.
Publicité
