OW Lee CASUAL FIRESIDE Metrop 5144-2645C Mode D'emploi page 9

CERAMIC ROCK MEDIA PLACEMENT
Figure 1,
Pour the lava granules into the
burner support covering the
burner completely.
Figure 2,
Place the larger rocks allowing
for proper air flow.
Figure 3,
Lay the smaller rocks on top
of the larger rocks allowing gaps
for proper air flow.
Note: See Page 7 for Protective Screen Media Clearance
CAUTION:
YOU MUST MAINTAIN THE LAYOUT AS SHOWN TO ENSURE PROPER OPERATION OF YOUR FIRE PIT.
IF YOU NEED TO REPOSITION ANY MATERIAL TO MAINTAIN THE PROPER LAYOUT, USE HEAT
RESISTANT GLOVES OR ALLOW MATERIAL ADEQUATE TIME TO COOL BEFORE HANDLING.
CAUTION: Lava granules used in a fire pit are porous and when heated up to normal operating temperature
can cause trapped gasses or moisture to expand and cause a "pop" and "launch" outside of the fire pit, which
could cause injury or property damage. Allow lava granules to completely dry after getting wet
BURN HAZARD. LAVA GRANULES, and CERAMIC ROCKS
WILL REMAIN HOT FOR SOME TIME AFTER USE.
hosed off, before lighting and using the fire pit.
Page 9
, rained on or