Publicité
Les langues disponibles
Les langues disponibles
BEFORE USE
Cleaning
Blades are sharp, please handle with care, in
order to avoid cuts and grazes.
1.
unpack the device and extract any inserts or
adhesive labels which might be present on the
device surface.
2.
Take out the protection from the jagged ice
crusher blade and from the stainless steel blade.
3.
Carefully wash by hand with hot water and soap
for dishes all the moving parts which get in
contact with food:
•
the dispenser cap, the lid and its seal, the
palette blade, the mixing blade and the ste-
am basket.
•
the stainless steel blade and the jagged ice
crusher blade with a small brush and taking
them from the upper part in order not to get
cut.
•
the container.
4.
Clean the engine with a wet cloth, well squeezed,
and the container housing; please avoid to have
water in the area where the container connector
is located.
The container, the cover and the measuring
cup can be washed in the dishwasher.
To wash in the dishwasher please put the cup in
higher position, away from direct splashes of
water and use a medium-low temperature cycle.
Please carefully dry all washed parts.
Mounting
1.
Position the engine on a horizontal flat surface,
leave some distance from the edges, so that
small movements and/or vibrations during the
use do not cause any damage to the device. The
suction cups must strongly adhere to the leaning
surface.
2.
Insert the container in its housing pushing down
until you hear a click.
3.
Mount the suitable accessory according to what
you need to do:
•
the stainless steel blade or the jagged ice
crusher blade by taking them from the top
in order not to get cut, and insert them on
the hexagonal insert.
take out the protection cover before you start
using the device
•
the mixing blade, by inserting it on the he-
xagonal insert.
•
position the steam basket directly in the
container after pouring water up to the re-
quested level for steam cooking.
4.
Position the lid seal so that the protruding edge
appears as it does in Figure A.
5.
Mount it on the lid in the direction shown by the
arrows on the external part of the seal.
6.
Position the lid on the container as shown in
picture A, then turn clockwise until you come to a
complete closed state.
7.
Insert the dispenser tap in the lid.
DEVICE DESCRIPTION
Introduction
This household appliance unites the rOBOT function
to the COOKING function; both functions can be
executed independently or simultaneously.
you can also add the TIMEr function, so that the
device can stop at the end of the process.
you can also set step-by-step the different phases of
the recipes, up to the cooked dish. The device also
features 15 programs to automatically execute all the
passages linked to the execution of multiple recipes,
just like they are described in the recipe book.
In order to learn how to fully exploit the potential of
this device, please initially follow all recipes
as they are described in the recipe book, which
includes examples and recommendations for any
type of processing.
In this way you'll learn the different process techniques
and the limitations in terms of quantity; after this,
you'll be able to automatically execute different
versions, in a very easy way.
Robot Function
The engine rotation, with regulation from 1 to 10,
allows very slow speeds, which are ideal to
mix during cooking, but also high speeds, which
guarantee the typical features of kitchen robots
/ mixers. Speed setting number 1 enables the
intermittent working of the engine, at minimal speed;
please use this setting to prepare meat, for
example braised meat or stews, or in general
foods which don't need a continuous mixing.
When you activate pulses in the engine (PuLSE
function), this is very useful in order to have a better
it en
25
Publicité
