Publicité
Les langues disponibles
Les langues disponibles
Using the gliding rack
The fully extendable Gliding rack makes food preparation easier, especially when
you are preparing heavier dishes. The Gliding rack has 2 glide tracks that allow
you to extend the rack well out of the oven without touching the sides of the oven
walls.
Installing the Gliding rack
Rack
Rack
Guides
Guides
DOB30x977Dx_AA_DG68-01313A-01_EN+MES+CFR.indb 35
DOB30x977Dx_AA_DG68-01313A-01_EN+MES+CFR.indb 35
With the Gliding rack in the Closed
position and the oven off, carefully insert
the Gliding Rack between the guides until
the rack reaches the back.
When using the Gliding rack in the oven,
be sure to pull on the handle of the rack
only to slide it in and out. If you grasp
the frame while using the rack, the entire
Gliding rack will be removed. Make sure
you use oven mitts when handling the
Gliding rack during cooking.
Removing the Gliding rack
Do not install the Gliding rack directly above
the Wire rack.
You will not be able to install it properly
and the rack could fall.
NOTE
You can install the Gliding rack in any rack positions except the lowest rack
position in the oven (level 1).
With the Gliding rack in the Closed
position and the oven off and cool, grasp
the rack and frame and pull both forward
to remove.
CAUTION
English 35
2023-03-14 오전 10:30:37
2023-03-14 오전 10:30:37
Publicité
