Publicité
Les langues disponibles
Les langues disponibles
Installation (continued)
INSTALLING THE LEVELING LEGS
Carefully check the utility sink for damage and/or missing parts prior
to installation . If there is any damage or if you are missing parts,
do not proceed with the installation . Report damage and/or missing
parts immediately to the manufacturer . Do not dispose of packaging
before you are satisfied with your new utility sink.
- Remove the utility sink (B) and place it on a soft, protective
surface (Fig . 1) .
- Turn the cabinet (A) upside down onto a protective surface .
- Gently put each leveling leg (G) into its proper location . Using
the four screws provided (J) per leveling leg, attach the leveling
legs (G) to the bottom of the cabinet (A) .
- Gently right the cabinet (A) .
- Using a carpenter's level, turn the base of each leveling leg (G)
until the cabinet (A) is level .
DOOR HANDLE INSTALLATION
1 . Insert the door hand screws (H) into the pre-drilled holes on
each door .
2 . Attach the door handles (F) and hand tighten the door handle
screws (H) .
3 . Repeat on other door .
All manuals and user guides at all-guides.com
8
CAUTION:
Do not place side load on the leveling legs
when righting the cabinet as they may break .
J
G
A
B
Fig . 1
F
H
Publicité
