Kerbl works Connect BT FM Mode D'emploi page 12

(EN) KERBL WORKS CONNECT BT|FM
HEARING PROTECTION WITH
LISTENING MODE (LIS)/FM/BLUETOOTH
Art. no 345131
345131 is a protection ear muff with electronic function of BLUETOOTH
EN352-1:2020, EN352-4:2020, EN352-6:2020 , EN352-8:2020 requirement. This product is intended use Electronics
earmuff with PP bracket and soft PVC cushion for hearing impaired workers to safe the user for hearing lose, in the noise
environment (for example >85dB), the device can protect the wearer not get hurt in proper use. In normal environment (the
sound<85dB), the wearer can hear the surrounding sounds and voice without taking off the device. Please read the entire
EN instruction manual before using the product and then save it for future reference We reserve the right for any errors in text
or images and any necessary changes made to technical data. If you have any questions concerning technical problems
please contact Albert Kerbl GmbH, Felizenzell 9, 84428 Buchbach, Germany, Tel: +49 8086 933-100, www.kerbl.works,
info@kerbl.com.
SAFETY:
• Warning: Do not use ear defenders whilst driving a vehicle in traffic, it can affect your concentration and lead to an
accident. Remember to always remove the ear defenders when cycling, walking, crossing roads, at railway crossings,
or in other situation requiring your full attention.
• Radio reception can vary depending on your location, movements, terrain, obstacles, etc.
• Radio reception is sensitive to electrical devices being turned on and off and this will be audible if you nearby such
devices.
• Never subject the product to high temperature, dust, heavy vibration or impacts. Bear in mind that a car left in the
summer sun can become very hot. Never leave the product where it could be subjected to high temperatures or direct
sunlight, such as on a car dashboard or windowsill. The recommended storage temperature of the product is
-20 to +45ºC.
• Heat can impair the performance of the radio built into the ear defenders.
• Before use, make sure that the ear cushions are whole and form a tight seal against your head.
• Never use the product in extremely dry environments where static electricity easily occurs.
• Use the ear defenders the entire time that you are exposed to a noisy environment.
• Risk of explosion if battery is replaced by an incorrect type, dispose of used batteries according to the instructions.
• The ear muffs should be fitted, adjusted and maintained acc. the information of the manufacturer.
• The ear muffs should be regularly inspect for the necessity of maintenance
• Failure to follow the recommendations will seriously impair the protective effect of the earmuffs
• This product may be adversely affected by certain chemical substances and further information should be sought from
the manufacturer.
ADJUSTING THE FIT:
1. Brush any hair off your ears, remove any earrings, pull the ear cups apart and place them
over your ears.
2. Position the ear cups so that the cushions form a tight seal around ears. Make sure
that no hair comes between the cushions and your head.
3. Adjust the headband, Hold the headband down against your head with one hand
and push the ear cups up until they sit comfortably over your ears
4. The headband should rest on the top of your head and the ear cups should
completely cover your ears
Note: The effectiveness of the ear defenders could be diminished by the temples
of spectacles if they are worn under the ear cups.
12
®
®
, FM, Listening(LIS) function, meets