•
Both the player and disc are coded by region. If the region
codes do not match, the disc cannot be played. This player is
coded for Region 1 discs.
Remote control does not work
• Remove obstructions between the remote control and the
player.
• Point the remote control at the remote control sensor of the
player.
• Replace the batteries with new ones.
Disc play starts, then stops immediately
•
Both the player and disc are coded by region. If the region
codes do not match, the disc cannot be played. This player is
coded for Region 1 discs.
• The disc is dirty. Clean it.
• Condensation has formed in the player. Let the player dry out,
then try again.
Picture is distorted
• Inspect the disc, it might be damaged. Try another disc.
•
It is normal for some distortion to appear during forward or
reverse scan.
No power
• If running on AC power:
• Make sure that the plug is correctly inserted in the wall
• Make sure that the AC adapter is inserted to the correct
•
•
If running on battery power:
•
• Make sure that the battery is fully charged.
• Make sure that the battery and AC adapter are not both
Specifications
Video system
Compatible discs
28
All manuals and user guides at all-guides.com
socket.
plug on the DVD player.
Make sure that the wall socket has power (Some wall
sockets are controlled by a switch).
Make sure that the battery is secured in place on the back
of the DVD player.
plugged in. If so, disconnect the AC adapter.
Laser
Semiconductor laser
Wavelength 650 nm/795 nm
NTSC
DVD/DVD+R/DVD+RW/DVD-R/
DVD-RW/CD/CD-R/CD-RW/MP3
www.insignia-products.com
NS-A2202 7" portable DVD player