peerless-AV Xtreme XHB554-EUK Mode D'emploi page 8

Removing Cord Cover
1. Remove two M5 low-profile hex screws and rear cover plate using 3mm allen wrench.
Do not disconnect lanyard.
2. Remove six M5 hex screws and cord cover using 3mm allen wrench.
1
CAUTION
Do not remove lanyard that connects the
rear cover plate to the display. Removing the
lanyard is considered a modification of the
display and will void the warranty.
A
2
Lanyard.
8
2022-04-11 #:180-9166-2
E
(2022-08-24)