Costway TS10166 Notice De Montage page 4

INSTALLATION
2
1
06
1. Use the configured hexagonal
wrench to install the rear tripod
with bolts and tighten it at the
bottom of the seat.
2. Use the configured hexagonal
wrench to install the front tripod
with bolts and tighten it at the
front of the seat.
3. Insert the front handle directly into
the installation hole in the direction
1
of the arrow , and insert the seat
tail plug in the direction of the
2
arrow .
4. The installation of the push bike
complete.
INSTALLATION OF PUSH ROD
& ADJUSTMENT OF FOOTREST
1
2. All installation complete.
3
1. Align the push rod with the
installation hole and insert it directly.
You can hear a "click" sound and
install it in place.
2
3. Press the red button as picture,
footrest can freely adjust the angle.
07