Publicité
Les langues disponibles
Les langues disponibles
Signal receiving unit
The signal receiving unit is attached to the indoor unit.
1
2
3
1
Temporary operation button
(See page 15)
2
Signal receiving part
The signal sent from the remote controller is
received.
3
Display lamp
One of displays flashed while an error occurs. When
the display lamp flashes, refer to "Before asking for
repair work".
4
lamp (Green)
This lamp illuminates when unit is on.
5
lamp (Green)
This lamp illuminates while the timer is reserved.
6
lamp (Orange)
In heating operation this lamp illuminates in the
following cases;
The operation has started.
The temp. controller has worked.
The unit is under defrost operation.
This lamp flashes while a trouble occurs.
1130615205_EN-ES-FR.indb 6
1130615205_EN-ES-FR.indb 6
CAUTION
Disagreement in operation mode
If "pi, pi" sound is heard, the display lamp goes on,
4
and the
lamp and
5
operation is not performed with the desired mode.
Even if you push START/STOP, MODE,
6
TEMPERATURE buttons when remote controller
operation is disabled by the central control or other
means, "pi" is heard 5 times and the button operation
is not accepted.
– 6 –
lamp flash alternately, the
EN
6-EN
9/8/2565 BE 15:38
9/8/2565 BE 15:38
Publicité
