Perel WC217 Mode D'emploi page 6

Indoor Temperature
Using this weather station for the first time, it may take up to a
few hours of collecting information before receiving accurate
forecasts.
The indoor temperature will automatically appear on the display.
When the measured temperature is lower than 0 °C, the weather
station will display LL. When the measured temperature is higher
than 50 °C, the weather station will display HH.
Max/Min Temperature
1.
2.
Display Brightness
In normal display mode, briefly press SNOOZE to select the
display brightness.
Energy-Saving Mode
When operated by battery, the display will switch off after
10 seconds. Press any button to switch on the display and exit
the energy-saving mode.
7. Troubleshooting
Problem
No indication on the display
Incorrect display
V. 01 – 06/12/2019
WC217
In normal display mode, briefly press MAX/MIN to display
the maximum recorded temperature. Press and hold
MAX/MIN to delete the recorded value.
Briefly press MAX/MIN again to display the minimum
recorded temperature. Press and hold MAX/MIN to delete
the recorded value.
Possible solution
Ensure correct battery polarity
Change the batteries
Check the power supply
The weather station has
entered the energy-saving
mode
Change the batteries
6 ©Velleman nv