Publicité
SUGGESTIONS FOR THE CORRECT FOOD STORAGE
Once the food has been inserted into the device, follow the rules of good refrigeration until it starts to heat
food. To this end, we recommend:
-
Always put the unit in a cool place before heating the food.
-
If you can not place the unit in a refrigerator (eg during transport), we recommend the use of the cold tiles
during a long journey. The food must be kept below 4 ℃ until it is heated.
-
After the meal, store leftovers food inside the unit: if you can not put the appliance in a refrigerator, it is
recommended to dischard perishable leftovers.
DESCRIPTION OF PARTS SC02
1 Steam vent
4 Heating bowl
7 Power light
10 Rubber sealing ring
TIPS FOR USE
CAUTION: unplug the unit before performing any of the operations below.
- Remove the protective plastic and each element of the package, before proceeding.
- Before using the unit for the first time, thoroughly wash all parts that will come into contact with food:
wash the transparent plastic dish (3) and the heating bowl (3) under warm water using neutral dishwashing
liquid; the lid (2) can be cleaned using a cloth or a soft sponge moistened with lukewarm water and mild
soap. Carefully dry all parts before using plugging.
- The unit can also be used for storing food in a refrigerator. Unplug the power cord before putting the unit
into the refrigerator.
Heating time of food is variable between 20 and 40 minutes, depending on ambient temperature.
Generally mean duration is 25-30 minutes at 25°C ambient temperature.
OPERATING
- Place the unit on a flat, stable and heat-resistant surface.
- Pour gently the food in the bowl (4) by using a spatula.
- If you wish to heat various types of food at the same time, place the transparent dish (3) over the heating
bowl (4) before use.
Note: the bowl (4) is ideal to warm pasta, rice, soups and creams. The transparent dish (3) can be used
simultaneously for heating meat, fish or vegetables.
- Install the lid (2) on the heating base (8), using the handle (11) and, pressing down slightly, hook the loking
tabs (9) placed on the u nit directly to the lid (2) and close until you hear a click.
- To use in the car, insert the pin of car cable (12) into the socket (6) on the unit and the connector to a
suitable socket (DC 12V) to start the appliance.
- To use in home, insert the pin of adaptor (5) into the socket (6) on the unit and plug the adaptor to the main
electrical outlet (AC 230V ~ 50Hz) to start the appliance.
- The power lamp (7) lights up to indicate that the heating process has started.
- Press on the steam vent (1) on the lid (2) to allow the regular release of vapor during the heating.
CAUTION: it is recommended to use oven gloves to avoid the risk of burns.
- Unplug the unit and press again on the steam vent (1) to close it, so as to keep food warm.
- Remove the lid by grabbing the handle (11) only, raising both locking tabs (9) at the same time.
CAUTION: lift the lid carefully to avoid injury that could be caused from hot steam formed inside the
unit during use.
- Remove food using a soft spatula to avoid scratching the plate.
Note: we do not recommend the use of sharp knives and cutlery on the dish and bowl as they may damage
their surfaces. In this regard, if you want to use the dish or the bowl to eat your meal, the use of plastic cutlery
is highly recommended.
2 Lid
5 Power adaptor
8 Heating base
11 Handle
3 Transparent dish
6 Power cord socket
9 Lid locking tabs
12 Car connector
11
Publicité
