Diagnostics - Olimpia splendid B0812 Manuel De L'utilisateur

Remote Controller
Operating control mode
By pressing the COOLING/HEATING button,
the remote control selects the operating mode
by switching on the LED corresponding to the
selection made (cooling
necessary for the chosen selection.
the remote control will memorise the mode
settings at the time of failure.

Diagnostics

The electronic control on the machine continuously monitors its
contact generates a coded alarm signal sending ON/OFF signals to
the remote control and switching on the alarm LED
sequences. Some alarm conditions are automatically reset, others
Example:
1 + 1 + 1=3
f / heating
The unit will operate with the times
h in pre-set
ON.
1
31
ECO control
By pressing the ECO button, the green Eco
LED
g or temperature from the normal condition to the
heating operation.
When the ECO button is pressed again, the
green LED f will go off and the outdoor unit
temperature to the normal condition.
the remote control will memorise the mode
settings at the time of failure.
The alarm code generated by a failure is shown to the operator.
the number corresponding to the second is reached (only for two-
digit codes).
E N G L I S H
e will come on and the outdoor unit
GB - 5