Main Components - HAEGER LR-PRO.002A Mode D'emploi

Main Components

1. Protect cover
3. Blade
5. Lint storage
7. Power cord
How to charge
1. Put switch to OFF (lower position).
2. Connect the power cable to the unit and then connect the plug on the
socket.
3. The charging light will be in red colour.
Notice for charging
1. Please use the AC voltage 220-240V.
2. Do put the switch to OFF position, so the unit cannot work. After charged
completed, take out the plug from socket and then take out the connector
from body.
3. Do let at least 8-10 hours for first time charging.
4. Do charge 8 hours while the unit isn't workable. Overcharging will affect the
life of battery.
5. Do charge at least every 6 months of not use this device for long time.
Instructions for use
(see photos 1-3)
2. Net cover
4. Body
6. Cleaning brush
8. Power inlet
Light
English
3