Philips One for All URC-4913 Manuel D'utilisation page 4

Les langues disponibles

STEP 2:

IF STEP 1 DOES NOT WORK AS EXPECTED

ARE SOME KEYS NOT WORKING AS EXPECTED?

If you nd some keys do not work as expected (or at all), proceed to the next

step.

1. Make sure your TV is on (not on standby).

2. Hold down RED + BLUE until the LED behind the

Point towards the TV and hold one of the keys that is

4. The remote will send a signal every 3 seconds.

5. When the correct function is shown on the screen (in this case the menu),

let go of the key.

6. The LED will blink twice - your remote is ready to use.

LEARNING

LEARN A NEW FUNCTION TO YOUR REMOTE

Your One For All remote can learn any function from your original (working)

remote.

Place the original remote facing the One For All remote on a at surface.

3. Press 975. The LED will blink twice.

Press the key on the One For All remote you want to learn on,

5. Press the key on the Original remote you want to learn, for

6. Two blinks: ok. Repeat from step 4 for any more keys to learn.

Long blink: try again from step 4.

7. When you have learned all the keys you need, press and hold

HOW TO DELETE A LEARNED FUNCTION

1. Hold down GREEN + YELLOW until the LED blinks twice.

2. Press 976.

3. Press the key to reset twice.

4. The LED ashes twice and the key will revert to the original function.

712183_Philips_Manual URC4913_RDN1230920_aangepaste versie.indd 4

ENGLISH

Power Key blinks twice

not working correctly (for example Menu). 

2 - 5 CM

To learn: Hold down GREEN + YELLOW until the LED

blinks twice.

for Example: the VOL + key. The LED will blink rapidly.

Example: the VOL + key of your Audio Device

the OK key for 3 seconds. The LED will blink twice.

23-09-2020 19:05