INSTALLATION AND CONNECTION
min.
min. 50 mm
100 mm
•
The appliance must be placed at a distance of at least 5 cm from an electric or gas cooker
and at least 30 cm from a radiator or heater. An insulation panel must be fitted when these
distances cannot be achieved.
•
The plug of the installed appliance must remain accessible!
•
The appliance's air outlet is at the top. Make sure that the outlet is not blocked. Blocking the
outlet can result in damage to the appliance.
•
The appliance must be moved and installed by at least two people.
•
Use caution when moving the appliance, to avoid damaging the floor.
•
Make sure the appliance does not damage the power cable during installation.
•
Place the appliance on a flat, stable surface.
•
The levelling feet allow you to level the appliance.
The wheels are not swivel castors and are therefore only suitable for moving forwards
and backwards. Moving the appliance sideways can damage your floor and the wheels.
Connecting the appliance
•
Connect mains lead of the appliance to the mains supply. The socket must be earthed. The
nominal voltage and frequency required for the appliance are shown on the appliance's type
plate/label with basic information.
EN 14