Publicité
Les langues disponibles
Les langues disponibles
Operating elements
a) Receiver box
4
3
2
1
The transmitter does not support infrared, therefore it cannot be used with the IR IN
socket.
b) Transmitter stick
USB
D
C
B
Setup and connection
• Place the receiver on a level surface near the video output device. If necessary, use a cloth
to protect the surface of your furniture.
• Switch off all devices that you want to connect to the wireless set.
• Connect the transmitter stick to an HDMI port on your video output device (e.g. the HDMI port
on a computer or a DVD/Blu-Ray player). The transmitter is powered via the USB-Y cable.
Insert each USB-A connector on the USB-Y cable into a USB port on a computer, and then
connect the micro USB connector to the micro USB port
Each USB port must provide a current of 500 mA. If necessary, connect the USB-Y
cable to the USB ports on the back of your computer. The transmitter stick must be
connected to two USB ports to ensure that there is sufficient power. If you wish to
use a USB hub to power the transmitter stick, ensure that the hub is connected to an
external power supply, otherwise the USB ports may not provide a sufficient current
(see "Technical data").
• Insert the HDMI cable into the HDMI OUT socket (3), and then connect the other end of the
cable to an HDMI port on your display device (e.g. monitor, TV or projector).
• Insert the USB connector on the power adapter into the micro USB port (4) on the receiver.
Connect the power adapter to a suitable mains socket.
Connection diagram
USB-Y power cable
HDMI port
Laptop
• Connect the HDMI port (A) to the output socket on your video output device, such as a
computer, Blu-Ray player, or games console (e.g. PS4 or Xbox). If necessary, use the 15 cm
HDMI cable supplied.
• The distance between the transmitter and receiver should not exceed 30 m.
• Insert the micro USB connector into the micro USB port (C) on the transmitter stick.
• Connect the video output device and the display device to a power source and turn them on.
All manuals and user guides at all-guides.com
1 Pairing button
2 PAIRING LED
3 HDMI OUT (output)
4 Micro USB port
A HDMI port
B Pairing button
C Micro USB port
D LED indicator
A
(C).
Power adapter
HDMI cable
HD projector
Setup and operation
• The red LED indicator (D) on the transmitter will turn on when the transmitter is connected
to a USB power source.
• The PAIRING LED (2) on the receiver indicates that the receiver is connected to the mains.
a) Pairing the transmitter with the receiver
• Press the pairing button (1) on the receiver.
• A message will be displayed on your display device.
• Press the pairing button (B) on the transmitter.
• A wireless connection will be established automatically.
b) LED indicator status
Status
Transmitter (TX)
Connected to a power
Red
supply
PAIRING button (1 and B)
Flashing red
pressed
Not paired
Flashing blue
Paired
Blue
Follow the onscreen prompts on your display device during the pairing process.
c) Wireless range
The maximum transmission range is 30 m. The range may be reduced by the following:
• Walls and reinforced concrete ceilings
• Double glazed windows
• Proximity to metal and conducting objects (e.g. radiators)
• Proximity to people
• Devices working on the same frequency (e.g. wireless video systems and Wi-Fi devices)
• Proximity to electrical devices, motors, transformers, power adapters,
• and computers
• Proximity to computers or other electrical devices with exposed components.
The range can vary significantly depending on the surroundings. If reception is poor, try moving
the receiver to another location. Do not place the receiver behind a TV.
Troubleshooting
Problem
Possible cause
There is no image
The cables are not
on the display
connected correctly.
device.
There is no sound.
HDCP compatibility
issues.
There is no 3D
3D mode is disabled.
effect on the display
Incompatible 3D shutter
device.
glasses
The image quality
Other wireless
is poor.
devices (e.g. routers
or microwaves)
are interfering with
transmission.
The transmitter
The video output device is
and receiver do
not switched on.
not connect, or
System error
the connection
terminates.
Receiver (RX)
Red
Blue
Blue
Blue
Suggested solution
Check that all cables are connected
correctly.
For best results, use a high-speed
HDMI cable.
Disconnect the transmitter and
receiver from the power supply to
restart the system.
Adjust the volume on your display
device.
Check that all cables are intact and
connected correctly.
Disconnect the transmitter and
receiver from the power supply to
restart the system.
Enable 3D mode on your monitor,
DLP projector and signal source
(AUTO or 3D ON).
Check that the shutter glasses have
sufficient battery power remaining.
Ensure that you are using the correct
shutter glasses for your 3D system.
Remove any sources of interference.
Place the receiver and transmitter in
an area without interference.
Connect the video output device to
the mains and switch it on.
Disconnect the transmitter and
receiver from the power supply to
restart the system.
Pair the transmitter and receiver
again (see "Pairing the transmitter
with the receiver").
Publicité
