Step 13
11
(x32)
11
2 people are required for this step.
Carefully turn the unit over onto its
front as shown.
Assure that the unit is square.
Distance from corner to corner must
be equal as shown.
Align the bottom edge of the back panel with the lower edge of the bottom shelf (F). Align side
edges with edge of left and right panels (A&B) and nail straight into back edges as shown.
littleseedskids.com
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART
OF THIS UNIT AND MUST BE INSTALLED PROPERLY.
L
B
unfinished
surface
23
F