TIPTEL 217 Plus wireless USB phone Manuel D'utilisation page 14

Installation
For an optimal functioning of this tiptel 217 plus wireless USB phone
we recommend the installation of the corresponding drivers. They
must be installed befor connecting the device to the USB interface of
your computer. The drivers can be obtained from our homepage.
The tiptel 217 plus wireless USB phone can be used in combination
with e.g. Skype, VoipBuster, NetAppel, SIPDiscount, VoIPStunt, Inter-
netCalls, VoIPDiscount, SparVoip, MSN Messenger, mediaring,
net2phone, dialpad, Google talk and Firefly. For a complete overview
of all programs please refer to www.tiptel.org in the download direc-
tory of this device.
1. Proceed to www.tiptel.org and choose the requested country. The
countryspecific tiptel homepage is opening. Click down left on
"Skype" resp. "VoIP" and then, under tiptel 217 plus wireless USB
phone on
2. Under "Download" please load the current USB driver for the de-
vice. Keep this directory in mind.
3. Go to the directory and double-click on "setup.exe". Follow the
instructions on your PC.
4. Re-boot your computer when you are requested to do so.
uk
5. Now connect the USB plug of the base station of the tiptel 217
plus wireless USB phone to a free USB port of your PC or note-
book. Should your PC not dispose of a USB conform interface
(partly with notebooks), the telephone will possibly not be recog-
nized correctly. You could manage this by using a USB-hub
(preferrably active model) between the telephone and the USB
port of you PC.
6. Keep your original windows CD at hands, you might be requested
to insert it. Download the telephony software Skype
a link to this software on our homepage at the end of the list of
features of the tiptel 217 plus wireless USB phone.
7. Install the software. Run "tiptel Manager for Skype" and allow it to
control Skype
8. You can now make telephone calls with your tiptel 217 plus wire-
.
TM
. Otherwise both keypad and display will not work.
14
TM
. You will find