Proline FP450 Manuel D'utilisation page 6

PRODUCT DESCRIPTION
Food pusher
Bowl cover
Insert medium
Chopping blade
Driving shaft
Processing bowl
Motor base
BEFORE FIRST USE
Before using your food processor for the rst time, thoroughly clean the parts that come into contact with
food (see the CLEANING AND MAINTENANCE section).
WARNING: Handle blades carefully. Failure to do so can result in cuts.
ASSEMBLY
Make sure that the appliance is switched o and unplugged from the mains socket.
1. Position the motor base on a dry, level surface with the control knob facing forward.
- To prevent slipping, you need to pay attention when the appliance is placed on the non-smooth surface,
such as wooden plate, plate covered with tablecloth, etc.
2. Position the processing bowl onto the base, then grasp the bowl handle and turn the bowl clockwise until
it locks into position.
3. Place the driving shaft over the rotor inside the bowl, seating it vertically.
4. Use the blade you want.
When using the chopping or kneading
blade, just seat it over the driving shaft.
Slicing blade
Kneading blade
When using slicing or grating blade, rst x it on the
insert medium and then seat
the insert medium over the driving shaft.
Attention: Only one blade can be used on the insert
medium at a time.
3
Grating blade