Positioning Products KINETIC BALANCE 402X Manuel D'utilisation page 5

EN
Neoprene Chest Belt X
Assembly instructions:
1. Ensure that you have the right product in the
right size.
Consideration: do not use the belt, if the client
suffers from vascular disease or disrupted sensi-
tivity. Seek advice from a doctor.
2. Carefully read the instructions included in the
packaging.
3. Ensure the product is complete.
4. Adjust cam buckles' position.
Attention: not all chairs have attachment points.
Use the tube clamps if necessary. This product
should be assembled by authorised personnel.
Consideration: the tube clamp is suitable for
round tubes from 19 to 15 mm. Attach the clamp
tube, whilst simultaneously attaching the cam
buckle.
5. Adjust the webbing straps.
6. Avoid uncomfortable and alleviate pressure
with regular intervals.
7. Always avoid constricting catheters and
stomas.
8. Tuck away the webbing straps' end into the
strap holders.
9. Ensure the webbing straps are not in contact
with any of the wheelchair's moving/turning parts.
Attention: daily check the attachment and tension
of the webbing straps. Regularly check if the
webbing straps, belt, and padded parts are being
worn out.
10. The side release buckles allow the chest
positioning to be opened and fastened while
being in use.
5