ohmex STI 7990 Manuel D'utilisation page 90

EN
• Insert the power plug in the socket
- The temperature indicator light (10) turns on
indicating that the plate (9) is heating.
- When the plate (9) has reached the set temperature
the temperature indicator light (10) turns off.
- Press the supersteam supply button (12), the pump
starts and after a few seconds the iron produces
steam.
At first use or after a long period of non-use
• Press the supersteam supply button (12) for at least 80
seconds or until the steam comes out of the plate (9).
This time is necessary for water to reach the iron from
the boiler.
The pump could generate
small noises for a few
seconds until it "catches"
water from the tank (2).
To ease this operation, to
lower the iron under the
appliance body level and to
press the supersteam supply
button (12) is advised.
During steam ironing, the indicator light (10) occasionally turns on
indicating that the plate (9) is heating to the correct temperature.
86
APPLIANCE USE
12
9
11
12
10
9
STI 7990