Publicité
Les langues disponibles
Les langues disponibles
AmpliTube TONEX ONE
Auto save
TONEX ONE automatically saves any changes applied to the current preset in real time. This "analog-like"
behavior avoids any edit loss for a faster and smoother experience without the need to manually save changes.
Clip
If you are running a signal that is too hot and is clipping TONEX ONE's output stage, the display ALT ALT led
becomes red.
Lower TONEX ONE volume to avoid clipping.
ALT colors
Green
•
– indicates that the pedal is running in dual mode, the footswitch toggles between preset A and
preset B.
Amber
•
– indicates that the pedal is running in stomp mode, the footswitch activates or bypasses the
selected preset.
Blue
•
– indicates that the pedal is in setup mode.
Shell pink
•
– indicates that the pedal is in tuning mode.
Purple
•
– indicates that the pedal is in preset browsing mode.
Safe mode
The safe mode is helpful when performing where you may want to lock the entire front panel to avoid unwanted
parameter changes, but still use the footswitch to operate with presets.
Access and exit the safe mode by holding down the ALT button for 3 seconds until the micro knobs blink.
Tuner
Hold the footwitch to access the tuner, the ALT led turns
While the tuner is active use the ALT button to change tuning mode between:
• Mute – while the tuner is active the output is muted.
• Thru – while the tuner is active the signal passes through.
Press the footswitch to exit the tuner.
19
shell
pink.
TONEX ONE overview
Publicité
