IK Multimedia AmpliTube TONEX ONE Mode D'emploi page 15

AmpliTube TONEX ONE
TONEX ONE for recording
You can also use TONEX ONE as an audio interface to record your guitar parts by connecting it to your
computer via USB. You can monitor with zero latency through the pedal using headphones or by connecting
active monitors to the stereo output of TONEX ONE using a Y cable.
This is an example of using the TONEX ONE for recording:
Disable direct monitoring from the TONEX Librarian if you monitor through your DAW to avoid double monitoring
effect while recording.
If you are using TONEX ONE to feed TONEX software or another amp simulator software, remember to bypass
TONEX ONE internal processing by going to stomp mode and set the pedal to bypass to send only the DI signal
to the amp simulator.
15
TONEX ONE overview