GreenWorks Pro GPW2300 Manuel De L'utilisateur page 7

3.2 UNPACK THE MACHINE
WARNING
Make sure that you correctly assemble the machine before
use.
WARNING
• If parts of the machine are damaged, do not use the
machine.
• If you do not have all the parts, do not operate the
machine.
• If parts are damaged or missing, contact the service
center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance with
local regulations.
3.3 INSTALL THE UPPER PANEL
2
1. Aligh the screw sleeves of the upper panel (2) with the
screw holes on the upper handle.
2. Push the screws (15) through the screw sleeves and
tighten them.
English
3.4 INSTALL THE HOSE HOOK
1. Push the hose hook (16) ends into the clips (17) behind
the front panel tightly .
3.5 INSTALL THE SPRAY GUN
HOLDER
15
1. Aligh the screw sleeves of the spray gun holder (3) with
the screw holes on the upper handle.
2. Push the screws (15) through the screw sleeves and
tighten them.
7
17
3
EN
16
13