Probuilder 89177 Manuel D'instructions page 30

MULTIMETER
Introduction
To get the most out of your new multimeter,
please read this instruction manual before
use. We also recommend that you save the
instructions in case you need to refer to them
at a later date.
The multimeter is a hand-held digital
measurement instrument for measuring DC
and AC voltage, resistance, diodes, continuity
and frequency.
Technical data
Counts to 3999 – 15 mm high digits
Data-hold function
Diode tester
Continuity buzzer
Size 115x75x18 mm
ABS body
2 test leads
Instruction manual
CE and LVD approved
Overvoltage category (CAT II) – 600 V
Uses CR2032/3V battery (included)
Resistance diode measurement
With digital display
WARNING
!
KEEP OUT OF REACH OF CHILDREN
Swallowing can lead to chemical burns,
perforation of soft tissue, and death.
Severe burns can occur within 2 hours
of ingestion. Seek medical attention
immediately.
30
Electrical symbols
DC or AC
Important safety information.
Refer to the manual.
Dangerous voltage maybe present.
Earth ground
Low battery
Fuse
Diode
Continuity test
Auto range
Conforms to European Union
directive