PROZIS Dash Manuel D'utilisation page 4

EN
PRODUCT DESCRIPTION: SEE PAGE 2, FIGURE A
1. Battery compartment
2. On/tare button
3. Unit button
4. Weighing platform
HOW TO USE: SEE PAGE 2
1. Remove the insulating strip (fig. B1).
2. Place the scale steadily on a hard and flat surface. Make sure the table is clean.
3. Press the "ON/TARE" button to switch on the scale (fig. B2), and the LCD will be turned on.
4. Press the "UNIT" button and you'll be able to choose between the four units "g", "lb:oz"
"oz" and "mL" (fig. C). Wait 2 seconds after choosing the unit, and "0" will be displayed.
5. Place the container or whatever you want to weigh on the scale platform and the weight
will be displayed on the screen.
6. Press the "ON/TARE" button (fig. D) to clear the weight of the platform content and the
screen will show "Tare" and "0 g". Then place the food into the container or add more
things to the platform and the weight of what you have added will be displayed on the
screen.
7. Continue to use the "ON/TARE" button and you can get the respective weight of every-
thing you add by repeating the above process. When everything is removed from the
platform, the total weight will be displayed on the screen.
8. Press the "ON/TARE" button to switch off the scale when the screen shows "0 g" if no more
weighing is needed, or it will switch off automatically if not used within 180 seconds.
TROUBLESHOOTING
Some issues that may arise can be solved by the user. If the problem persists after having
tried the following solutions, please contact Prozis customer service.
PROBLEM CAUSE
"Lo" appears on the screen.
The battery is low.
The battery is empty. The plastic
No information on the screen. strip was not removed.
"EEEE" appears on the screen. Indicates overload. The maximum
capacity of this scale is 5 kg/11 lb.
Warranty statement
All electrical and electronic products commercialized by Prozis via www.prozis.com are cov-
ered by the warranty applicable to the purchase and sale of consumer goods.
6
SOLUTION
Change the battery of the
device.
Change the battery of
the device. Remove the
plastic strip.
Remove some weight.
GENERAL CONSIDERATIONS
This document contains the terms and conditions of Prozis' warranty for final consumers. This
warranty is valid exclusively for consumers who purchase the product for non-professional
purposes.
WARRANTY PERIOD
Prozis guarantees the product is to remain free from material and production defects for a
3-year period, counting from the date of initial purchase by a consumer and respective deliv-
ery, or for longer if legally established by the applicable national law. In the event that repair
is required, this 3-year period is suspended during repair time.
CONSUMABLES
The gradual performance decrease caused by prolonged use of the product's consumable
components, such as batteries, is not covered by this warranty unless the malfunction is
caused by faulty design, materials or production.
HOW TO MAKE A CLAIM
If the need arises to exercise the rights conceded to you through this warranty, please contact
Prozis customer service via the communication channels provided on the Prozis website,
and follow the provided instructions or recommendations. Contact and technical assistance
information is also provided at the end of this warranty.
Any claims made regarding this warranty will only be valid if proof of purchase is presented
by the original customer. This proof of purchase may be the original invoice or receipt, as
long as it includes information regarding the date of purchase and the product's model
name.
WARRANTY REPAIRS
Any repairs made under this warranty cannot be made by third parties. This warranty does
not apply to any repairs, or damage caused directly by such repairs, that have impacted or
caused the damage that is the subject of the respective warranty claim.
EXCLUSIONS
The following situations are not covered by this warranty:
1. Any wear and tear of parts and components resulting from normal product use.
2. Cracks, dents, scratches, and other types of superficial damage that only affect the prod-
uct's appearance.
3. Any malfunction caused by inappropriate use of the product that does not comply with
user manual instructions.
4. Use and storage of the product not complying with user manual instructions.
5. Opening of the product by a third party who is not authorized to proceed to its repair.
6. Altering or changing parts or components, whether internal or external.
7. Damage caused by battery leakage resulting from the breaking of any of its components,
EN EN
7 7