RS TFN-1036B Guide D'utilisation page 5

1. Plug the power supply cord into an electrical outlet. The unit will 'beep' to indicate that unit is in
Standby mode. The LED temperature display will display the room temperature.
TOUCH SCREEN PANEL OR REMOTE CONTROL OPERATION
All functions below operate either using the touch screen panel or remote control.
ON/OFF
Touch panel to turn unit ON/OFF.
FAN SPEED
Touch the Fan Speed to control the fan speed. (Low, Medium or High)
OSCILLATION
Touch Oscillation to turn Oscillation ON/OFF.
MODE
Touch the Mode button to change between Normal, Natural and Sleep function.
Normal- Normal operation mode.
Natural- The air flow speed will increase and decrease gradually- much like wind.
Sleep- In Sleep mode, the air flow will turn ON/OFF naturally to provide air comfort while you sleep.
TIMER
Touch Timer to set Timer. (1-12 hours)
WARNING:
-Unplug the fan from electrical supply source before cleaning
-Do not use water directly on the fan for cleaning metal surfaces.
-Never immerse the fan or any wires in water.
-Do not use harmful cleaners.
-Do not bend the blades
1. Use soft damp cloth, then wipe the surface of the fan. In order to remove the dust from the grill, use a
vacuum cleaner or remove the front grille by removing the securing screw on the edge of the grill with
a screwdriver.
2. After cleaning, remount the grill and faster the securing screw on the edge of the grill.
3. Do not use harmful cleaners.
4. Do not bend the blades.
STORAGE
Keep unit in original carton for storage of fan. Coin the power cord to avoid damage during storage.
OPERATION
CARE AND MAINTAINANCE
-5-
TFN-1036B