RS TFN-1036B Guide D'utilisation page 2

READ AND FOLLOW ALL INSTRUCTIONS BEFORE OPERATING FAN. DO NOT USE FAN IF
ANY PART IS DAMAGED OR MISSING.
IMPORTANT INSTRUCTIONS
• Use this fan only as described in this manual. Any other use not recommended by the manufacturer
may cause electrical shock, fire or injury.
• To reduce the risk of fire or electrical shock, do no expose to water or rain.
• To reduce the risk of fire or electrical shock, do not use with fan with any solid-state speed control
device.
• Automatically operated device- to reduce the risk of injury, disconnect from power supply before
servicing.
• If the power supply cored is damaged, contact your local service centre or a qualified electrician to
install an appropriate replacement cord to prevent any injury or damage.
• This unit does not apply to be used in locations where special conditions prevail, such as the presence
of a corrosive or explosive atmosphere. (dust, vapor or gas)
• Do not place the fan on a small, not level, uneven or any surface which might allow fan to tip or fall
• This unit is not intended for use by persons (including children) with reduced physical, sensory or
metal capabilities, or lack of experience and knowledge, unless they have been given supervision or
instructions concerning use of the fan by a person responsible for their safety.
• Children should be supervised to ensure that the do not play with the fan.
• This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit
situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user
servicing instructions (follow product marking for proper fuse rating) and check the product. If the
replacement fuse blows, a short-circuit may be present and the product should be discarded or
returned to an authorized service facility for examination and / or repair.
• This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric
shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat
this safety feature.
GENERAL USE
• Never insert fingers or any other objects through the grille guard when fan is in operation.
• Do not unplug the fan by pulling the cable cord. Unplug by holding the plug and pulling.
• Disconnect the fan from its power source when moving from one location to another.
• Disconnect the fan from its power source when removing guards for cleaning.
• Be sure fan is on a stable, flat surface when in operation.
• Do not use fan in windows. Rain and moisture may create electrical hazard.
• Do not pour water on the housing or control panel.
• Close supervision is necessary when this fan is used near children, the elderly and pets.
• Do not place heavy items or sit on the fan.
• Do not place the fan near an open flame, cooking or heating appliance or hot surface.
SAFETY INSTRUCTIONS
-2-