MotionBlinds CM-09 Guide De Configuration page 10

Reset the connection
Hold the program button for 10 seconds to delete the connection between the blind and the app.
The blind steps up and down 1 time to indicate that the connection is reset. Now the blind can be
reconnected.
10
Reset the blind
Resetting the blind results in deleting the end positions and connections of the blind with apps
and remote controls. Shortly press the program button to activate program mode. The blind will
start stepping up and down.Hold the reset/program button for at least 20 seconds to reset the
blind. The blind will stop stepping twice. After the second stop, the blind will give one extra step
to indicate that is has been reset.
Motion setup guide CM-09.indd 10 Motion setup guide CM-09.indd 10
Short press
+
1 x
10 s
1 x
20 s
12-10-2021 10:14:58 12-10-2021 10:14:58