Télécharger Imprimer la page

Genesis GLVC08B Manuel D'utilisation page 9

Publicité

Les langues disponibles

Les langues disponibles

HOW TO REMOVE AND EMPTY THE COLLECTION CUP (FIG 3)
follow indicators on the side of vacuum, twist the collection cup (3) with filters counter-clockwise to remove.
With the collection cup removed, grab the bar in the center of the end cap (16), pull the filter assembly out.
The debris in the collection cup can be disposed of as needed.
NOTE:
Clean collection cup frequently for best performance.
HOW TO REMOVE AND CLEAN FILTERS (FIG 4)
Remove the collection cup and filters as noted above.
Twist the bar of the end cap (16) clockwise to remove from the pre-filter.
The filter assembly can now be seperated into 3 parts, pre-filter (17), HEPA filter (15) and end cap (16).
To clean the pre-filter and HEPA filter, lightly tap each against a solid object.
If the filters require stronger cleaning, a light pressure air source can be used or they may be washed with
warm water and dish soap.
NOTE:
If washed, allow the HEPA filter to dry for 24 hours before replacing in vacuum
follow the removal steps in reverse to reinsert the filter and collection cup.
3
FIG 3
LUBRICATION
This tool is permanently lubricated at the factory and requires no additional lubrication.
TWO-YEAR WARRANTY
This product is warranted free from defects in material and workmanship for 2 years after date of purchase. This
limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser
is covered by this warranty and it is not transferable. Prior to returning your tool to store location of purchase,
please call Toll-free Help Line for possible solutions.
THIS PRODUCT IS NOT WARRANTED IF USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.
ACCESSORIES INCLUDED IN THIS KIT ARE NOT COVERED BY THE 2 YEAR WARRANTY.
BATTERY INCLUDED IS WARRANTED FOR ONE (1) YEAR AFTER DATE OF PURCHASE.
TOLL-FREE HELP LINE
for questions about this or any other GENESIS Product, please call Toll-free:
www.genesispowertools.com
Or visit our web site:
©Richpower Industries, Inc. All Rights reserved
Richpower Industries, Inc.
36 Hampton Road
Williamston, SC 29697
3
17
FIG 4
888-552-8665
15
16
.
9

Publicité

loading