Télécharger Imprimer la page

LIVARNO home CS92033K122023-6 Instructions De Montage Et D'utilisation page 14

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Insert the included steel tube
concrete hardens. Then use a spirit level to check the vertical position
of the product (see Fig. D).
After the concrete mass has completely hardened, you can now insert
the column
7
so, remove the protective cover
You can now use the product.
Use
Opening the product
To open the product, push the star component
encounters resistance and locks into place.
Note: Make sure that the washing lines
otherwise this prevents the product from spreading out.
Re-tightening the lines
To re-tighten the washing line
of the arms
2
Pull the washing line
Then firmly knot the washing line
Closing the product
Remove all objects from the washing line
Release the grip button
Pull the star component
10 GB/IE/NI
into the ground sleeve
3
into the steel tube
6
, undo the knotted strings at the ends
1
.
from bottom to top until they sit taut.
1
on the column.
8
downwards as far as it will go.
9
in the ground sleeve
3
from the column
upwards until it
9
do not get tangled –
1
again.
1
.
1
before the
4
. To do
4
.
7

Publicité

loading