Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
CLEANING
*** Ensure the unit is unplugged before cleaning the unit ***
Cleaning the condenser coil
For efficient operation, it is important that the condenser surface be kept free of dust, dirt, and
lint. New Air recommends cleaning the condenser coil and fins at least once per month. Clean
with a commercial condenser coil brush, available from any kitchen equipment retailer.
Brush the condenser fins from top to bottom, not side to side. After cleaning, straighten any
bent condenser fins with a fine comb.
Cleaning the fan blades and motor
If necessary, clean the fan blades and motor with a soft cloth. If it is necessary to
wash the fan blades, cover the fan motor to prevent moisture damage.
Cleaning the interior of unit
When cleaning the cabinet interior, use warm water and mild soap. Do not use steel wool, caus-
tic soap, abrasive cleaners, or bleach that may damage the stainless steel surface.
Cleaning the back panel:
1. Take down the setscrews of back panel one by one manually, and then take down the back
panel.
2. Clean the backboard behind the panel by scour, pay attention to keep the safety of
the heat preservation material covered by the cupreous tube, clean the parts around the
motherboard holes, clean the back of the panel, dry the cleaning parts with a soft cloth.
3. Fix the back panel on the cabinet after cleaning. Wash door gaskets on a regular basis,
preferably weekly. Simply remove door gasket from the frame of the door, soak in warm wa-
ter and soap for thirty (30) minutes, dry with soft cloth, and replace. Check door gaskets for
proper seal after they are replaced.
WARNING: Disconnect power cord before cleaning any parts of the unit.
10
New Air Refrigeration
NSR Series: Maintenance
Publicité
