Safety Notes; Intended Use - PS 988600 Mode D'emploi

Random orbital polisher SHINEMASTER
1 Technical specifications
Art. 988600
Voltage:
Power consumption:
Variable speed:
Orbit:
Thread connection:
max. Ø backing plate:
max. Ø polishing pad:
CSE (Constant Speed Electronic):
Safety class:
Weight (without power cord):
2 Observe the following before commissioning
2.1

Safety notes

Appliances used at many different locations including open air must be
•
connected via a current surge preventing switch.
Always wear goggles when using the machine. lt is recommended to wear
•
gloves, sturdy non slipping shoes and apron.
Sawdust and splinters must not be removed while the machine is running.
•
Always disconnect the plug from the socket before carrying out any work
•
on the machine.
Only plug-in when machine is switched off.
•
Keep mains lead clear from working range of the machine.
•
Always lead the cable away behind you.
•
Never reach into the danger area of the plane when it is running.
•
Only use tools whose permitted speed is at least as high as the highest
•
no-load speed of the machine.
2.2

Intended use

The machine is intended for polishing painted surfaces. For reasons of electrical
safety the machine must not be damp nor operated in a humid environment. The
machine may only be used for dry sanding.
The user is liable for any damage
or accidents resulting from use not in
accordance with the intended use.
3 Starting and stopping
Make sure that the power source is the same as that specified on the tool's name
plate and connect the tool to the power source.
Press and hold down the switch to start the motor. To lock into position, hold down
the locking button and release the switch. To stop the motor, briefly press and
release the switch.
230VAC/50-60Hz.
900W
-1
2.500-6.800min
8mm
5/16"-24
125mm
150mm
no
II
2,3kg
230VAC/50-60Hz.
900W
-1
1.800-4.800min
21mm
5/16"-24
150mm
180mm
yes
II
2,5kg
4