ONKRON NP25 Mode D'emploi page 5

2.1 Wooden wall mounting, wooden studs for single layered
dry walls
• Put the drilling template (L) to the wall, mark drilling spots.
IMPORTANT: Dowels (I) are not needed!
L
• Drill holes using a Ø 4 mm (5/32") bit at
depth minimum 2.76" (70mm).
IMPORTANT: Do not use the wrench (G) from the kit!
H
•
•
The bottom
of the bracket
70 mm
(2.76")
Put the mount to the wall
the way, that mounting
slots are located at the
bottom.
Install the mount on the
wall using screws М7х80
(Н).
G
5