Télécharger Imprimer la page

ONKRON NP25 Mode D'emploi page 4

Support inclinable et orientable pour tv

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
1. Detach VESA plate
Disassemble TV wall mount to pieces:
Detach VESA-panel by unscrewing bolts with key (G).
Remove plastic panels by sliding them apart.
Plastic
panels
WARNING: DO NOT apply much force while detaching plastic covers!
They may break and this case is not covered by the warranty.
2. Wall mounting
WARNING: Check the wall's material and thickness of its finishing
layer.
Assembly kit includes hardware suitable for mounting on concrete
wall with a plaster thickness of no more than 0.2" (5 mm) or dry walls
with wooden studs.
Walls made of hollow brick, aerated concrete or double layered dry
walls need another mounting type that can be bought separately.
WARNING: DO NOT drill holes in
places where wiring may be located.
4
VESA panel
WARNING: DO NOT drill holes in
places where water pipe may be
located.
G

Publicité

loading

Produits Connexes pour ONKRON NP25