Inventum KV1850B Mode D'emploi page 32

3
using the appliance for the first time
Before using the appliance for the first time, proceed as follows: carefully unpack the appliance and remove all packaging
material and any promotional stickers. Keep the packaging (plastic bags, polystyrene and cardboard) out of reach of
children. After unpacking the appliance, carefully check it for external damage that may have occurred during transport.
Place the appliance on a sturdy, flat surface and make sure there is enough space around it for sufficient ventilation.
A minimum space of 10 cm is required between the appliance and the surrounding walls. In this way the appliance is able to
release heat properly, cool well and function in an energy efficient way.
• You can use the adjustable feet to the left and right to level the appliance.
• Turn the adjustable feet clockwise to lower the appliance.
• Turn the adjustable feet counter-clockwise to raise the appliance.
Do not place the appliance near heat sources such as central heating or a stove. Do take note of the climate class of the
appliance. When placed in a room that is too cold, the freezer will not function properly.
After placing the appliance, leave it for at least 12 hours before inserting the plug in the socket.
First clean the interior of the appliance. Use warm soapy water with, for instance, washing-up liquid, all-purpose cleaner or
soda. Wipe the inside of the appliance after cleaning with clean water and properly wipe everything dry. Leave the appliance
to dry for 1 to 2 hours.
Adjustable feet
4
use
The control unit of the appliance is located on the outside. Check that the voltage corresponds with the voltage stated on
the information plate and insert the plug in the socket.
Important: the operating panel will only light up when a key is pressed or one of the doors is opened. The rest of the time
the operating panel will be standby and not light up.
Important: the operating panel locks automatically -
cooling / super freezing must be pressed down for 3 seconds until the key lock indicator switches off on the control panel.
Instruction: the recommended temperature setting lies between 0°C and 4°C for the cooler section, and between -18°C
and -24°C for the freezer section.
Instruction: The ambient temperature, the frequency of opening the door and the position of the appliance have an effect
on the temperature in the appliance. Take this into account when setting the thermostat.
32
• English
H
L
. For adjusting the temperature or a function, the key for super