Publicité
CSE-M53G-EVB Manual Ver. 1.2
1.4 Interfaces
①
Power enabling port(S1): This port is to enable/disable supplying power to
this board.
②
LED group 1
Label
Color
PWR (D10)
③
DC jack : This is for connecting DC 5V power.
④
RJ RJ45 connector: This is for connecting an Ethernet cable.
⑤
9-pin D-sub male connector: This is for connecting a serial cable.
Figure 1-2 Interfaces
Supplying Power
Enable
Disable
Figure 1-3 Power enabling port
Red
On – supplying power to the board
Table 1-2 LED group 1
- 4 -
▽
S1
Operation
https://www.ezTCP.com
Publicité
