Vitesy Natede Manuel De L'utilisateur page 11

11
instrument. Cleaning and maintenance should not be done by children
without adult supervision.
-> Have the appliance properly positioned to ensure good stability
during its operation and make sure that no one can trip over the cable.
-> Store the appliance in a dry place inaccessible to children (put the
appliance back in the package).
-> The appliance is not waterproofed.
-> Indoor use only.
-> Do not use this appliance in close proximity to a bathtub, shower
or swimming pool (observe a minimum distance of 3 m). Place the
appliance so that a person inside the tub cannot touch the appliance.
-> Do not place the appliance near a heat source. Do not subject the
power cord to direct heat (such as hot plates, open flames, hot irons or
heaters for example). Protect power cables from oil.
-> Do not store this device outside.
-> CAUTION: NOT SUITABLE FOR SOLID-STATE SPEED CONTROLS.
-> TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE
THIS FAN WITH ANY SOLID-STATE SPEED CONTROL INSTRUMENT.
-> "CLASS III" fan, can only be powered by 12Vdc.
-> The weighted sound pressure level is less than 70db.
-> To ignore enabled or remote smart functions, disconnect the device
from the network.
-> Before connecting Natede to the power outlet, make sure the voltage
and power frequency of the electrical source are in accordance with
the nameplate of the device, these must match exactly.
-> Connect the cable to AC power only. Comply with the voltage
information on the device.
-> The device must be powered only at safety low voltage,
corresponding to the markings on the device.
-> The device should only be used with the power supply provided.
-> Use this device only with the power supplies:
- Sunny Computer Technology EU s.r.o - Model SYS 1451-2412
- Kuantech Co LTD - Model KSA-24W- 120200D5
-> Do not use extension cords or run the cord over sharp edges and