BorMann PRO BBS1210 Mode D'emploi page 7

EN
It is normal for scroll saws to create a lot of vibration.
Fixing the saw down to a heavy duty work bench is recommended.
Some people also find using a vibration absorbing mat helps.
There are three bench mounting point provided.
There are two types of blade that can be used with this scroll saw.
When fitting a blade, always ensure the teeth of the blade are
pointing down and facing towards the direction of feed.
Plain end type blade
Pin end type blade
Using pin end blades
The pin type blade simply hooks over the upper and lower blade
holder.
Make sure the pins sit in the indentation.
Pin type blades are quick and easy to change, but are not available
in very narrow widths for making the most intricate cuts.
To fit the blade:
Remove the table insert by pressing upwards from underneath the
table
7
WWW.NIKOLAOUTOOLS.COM