Change Master Pin Code
(Default is 123456)
Step 1
Press any button to activate the keypad, then press
Step 2
Enter Default Master Pin Code 123456, then press #.
Step 3
Enter NEW Master Pin Code, then press #.
Step 4
Re-enter the new 4~6 digits again, then press #.
Note
• Master Pin Code can be programmed from 4 to 6 digits.
• Master Pin Code can be used to open door if no user code/card/tag is programmed, once a new
s u
r e
s i
p
o r
g
a r
m
m
e
, d
M
a
t s
r e
P
n i
C
o
d
e
w
• Master Pin Code can be used to open door if all user cards/tags are deleted.
3
WAFERLOCK CORPORATION
0 # to set up the Master Pin Code.
Default Master Pin Code is 123456.
Correct Master Pin Code: 1 beep followed by green
Incorrect Master Pin Code: 2 beeps followed by red
If enter less than 4 digits or over 6 digits, 2 beeps
If code already exists, 2 beeps followed by red light
If new Master Pin Code is programmed, 1 beep
standby.
If the code matches, 1 beep followed by green light
l l i
n
t o
b
e
a
b
e l
o t
u
e s
o t
o
p
e
n
h t
e
d
o
o
. r
WAFERLOCK CORPORATION
Lock Setup
Follow below steps to get your lock setup with WAFERKEY App.
You can also use the mobile App to set up your lock step-by-step and access installation videos.
Step 1
Download the App by searching "WAFERKEY" in the App Store (iOS) or on Google Play (Android).
Step 2
Open the App, simply use a Third Party Login
or register a WAFERKEY account.
Step 4
Pair the lock in the App and start to use it.
Note
• The WAFERKEY App works on iPhone with iOS 13.6 or later, or devices with Android 8.0 or later.
• Please refer to the instruction in WAFERKEY App for more information.
• Once the lock turns to App Mode, ALL the existing user access settings (Key Card, Passcode ...)
will be deleted.
DON'T WANT TO USE THE APP?
Please go to page P05-12 for manual programming instructions for Standalone Mode.
Questions about your new lock?
Let us help you!
support@waferlock.com
Step 3
Turn on Bluetooth on your smartphone, stay near
the lock and follow the instruction in the App.
4