3.
IDENTIFICATION OF PARTS
The contents of the package and the parts of the appliance
4.
COMMISSIONING AND FIRST START-UP
Some preliminary operations are necessary before first use. Proceed as follows:
Unpack the appliance and check the conditions and completeness of the
equipment, as indicated in the previous chapter.
Keep the packaging for 15 days in case it needs to be returned to the retailer; after
this period, dispose of it in accordance with the instructions on the separation of
materials indicated on it.
Read this manual in its entirety, paying particular attention to the instructions for
safe use.
Carefully remove all possible fastening materials from parts, including internal
parts.
Fully remove any stickers from the surface of the appliance.
The folding support legs are packed disassembled from the heating surface. To
mount the legs onto the heating surface, fully open them and, using moderate
pressure, connect the clips of the heating surface to the legs so that it is symmetrically
positioned on them.
Place the appliance on a flat, stable surface, taking care to reserve 10 cm of space
on all sides, at the rear and above the appliance for the necessary air circulation.
15
1: Garment drying
rods (heating surface)
2: Folding support
legs
3: Power cord: the
power switch is
located near the
appliance cable
socket