Cleaning - all-clad 1500811283 Guide D'utilisation

5. Then press the POWER button and hold down to begin blending. Always immerse the blending shaft first, then
press POWER to avoid splashing. Also take care when blending large quantities or when using deep containers
to ensure that the blending body is not immersed in foods or liquids. Only the blending shaft should be immersed
in foods or liquids.
6. Slowly move the blender shaft up and down or in a circular motion to process foods evenly.
To pause blending or when blending is complete, release the POWER button. For maximum
speed, set the speed dial to HIGH and press the TURBO button instead of POWER.
7. Unplug the blender and then detach the blender shaft. Refer to the CLEANING section for
cleaning instructions.
CAUTION: Blades are extremely sharp. To avoid injury, take care when detaching the blender shaft.
CAUTION: the blades are extremely sharp.
- Always disconnect the appliance before cleaning it.
- Do not immerse the blender, power supply cord or plug into water or any other liquid.
- Do not wash any of the parts in automatic dishwasher.
- Do not use harsh or abrasive cleaning agents or solvents.
Before using for the first time, as well as after use each use, clean the appliance as follows:
Blender Body: Wipe exterior surface with a clean damp cloth or sponge and dry thoroughly. Never immerse in water
or any other liquid.
Detachable Shaft: Detach the Blender Shaft from the Blender Body by turning clockwise. Then wash the Blender
Shaft under running water. Take care to ensure that water does not enter the hollow shaft of the
blender shaft. Dry throroughly.
C L E A N I N G
EN
7