PNI SafeHome PT225S Manuel Utilisateur page 6

All manuals and user guides at all-guidesbox.com
your mobile phone.
4. To add the detector to the application, click on
the "+" icon in the upper right corner.
5. Press the Reset key for about 5 seconds using
the included key. The LED on the detector flashes
quickly.
6. Select from the left menu Sensors - Smoke
detector (WiFi)
7. Select the WiFi network you want to connect to
and add the network password.
8. If the LED on the detector flashes quicky,
press Next and wait for the application to find the
detector.
9. After identifying your detector, press the Done
button.
6 - User manual