Publicité
Les langues disponibles
Les langues disponibles
INTRODUCTION
Dear Customer,
We thank you for purchasing our product. Please read the following
operating instructions carefully before using the product and keep it
for future reference. Please check the product for damage before use!
GENERAL:
Please read the following operating instructions carefully before commissioning and keep them for future reference.
WARNING:
When using outdoor use portable luminaires, basic safety precautions should always be followed to
reduce the risk of fire, electric shock, and personal injury, including the following:
a) Ground Fault Circuit Interrupter (GFCI) protection is to be provided on the circuit(s) or outlet(s) to be used for the
wet location portable luminaire Receptacles are available having built-in GFCI protection and are able to be used for
this mea-sure of safety.
b) Use only with on extension cord for outdoor use, such as an extension cord of cord type SEW, SEOW, SEOOW, SOW,
SOOW, STW, STOW, STOOW, SJEW, SJEOW, SJEOOW, SJW, SJOW, SJOOW, SJTW, SJTOW or SJTOOW.
SAFETY
Adhere to and keep operating instructions!
Pass operating instructions on to subsequent owners!
Not intended for use by children!
Do not operate a damaged lamp!
The light source in the lamp can only be replaced by the manufacturer!
The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
Never look directly into the LED light source. The light emitted can contain the colour blue.
Always set up at least 1m away from illuminated areas.
Always allow sufficient cooling and disconnect the spotlight for cleaning and secure the circuit against being switched on again.
Use only with a sufficiently protected 120V~ installation.
Must not be used in rooms that represent an explosion hazard (e.g. cabinetmaker's workshop, painting operation, or similar).
Must not be used in the immediate vicinity of flammable materials.
Must not be immersed in water or other liquids.
Must not be operated with wet hands.
Must never be sprayed or cleaned using a steam pressure cleaner since this can damage the insulation and seals.
Must never be repaired by the user. Repairs must only be carried out by the manufacturer or an authorized service representative.
Never put anything on the product or hang anything on this product.
Always disconnect the product from mains at least 10 minutes allowing to cool down before any maintenance or adjustment.
Cleaning
Disconnect the product and secure the circuit against being switched on again.
Let the lamp cool down sufficiently!
Only use a dry or slightly damp, lint-free cloth for cleaning, possibly a mild cleaning agent use.
Do not use any abrasive or solvent-based cleaning agents.
Never hose down or use a steam pressure cleaner for cleaning, insulation and seals will be damaged!
2
1
3
2
1. ON/OFF button
5
2. Plug
3. Hook
4
4. Wall fixing holes x 2
5. Tripod fixing
Publicité
